Ordered a Big Growl exhaust from Jireh Cycles.
 |
| Big Growl Exhaust P/N 60-301 |
The exhaust was lengthened by about 0.5" just behind the mounting flange which moved the exhaust out far enough to clear the transmission. This part of the project was done a lot earlier when my welding skills were non-existent (some might say that is still the case) and I was pretty sure I would destroy the pipes. The extension was cut and welded by a real welder. Fast forward many months and I would TIG this myself.
 |
| Extended length |
The exhausts have a mounting tab on the rear and come with mounting hardware. I cut a bracket out of 1/4" steel that got welded to the frame as a permanent mounting point.
 |
| Mounting bracket welded to the frame |
 |
| Exhaust Flange closeup |
 |
| EVO Big Twin Mounting flange kit |
 |
| Mounted exhaust |
